What Are The Precautions For Installing Induction Equipment?

The induction heating equipment produced by Baoding Wande Electric uses AC power supply as energy source, adjusts it to the induction heating medium frequency current through the medium frequency transformer, and then achieves the purpose of heating by heating (long and short coil), control and other devices. What should we pay attention to when installing induction heating equipment?

Baoding Wande Electric is specialized in induction heating power supply equipment manufacturers, our company in the installation of induction heating equipment when the general note:

1. Grounding: Grounding of induction heating is not only to prevent danger, but more importantly to prevent high-frequency induction interference. Radio waves. The lower the grounding resistance, the better. The grounding resistance is less than 4 ohms. The grounding method is to use the copper plate 3mm x 365mm x 1200mm to stand relatively apart from 1 to 2m, and the buried position is about 1.5 to 2.5m below the frame of the equipment cabinet. The effect is better when charcoal and other conductors are mixed near the copper plate grounding.

2. Foundation: The foundation of the installation equipment is generally 50 ~ 100mm higher than the ground, and the water supply and power supply of the equipment should have special trenches. The trench shall be provided with a drainage outlet to prevent water accumulation in the trench.

3. Power distribution: The installation of induction heating equipment should pay attention to the use of electricity in the public power grid is a three-phase four-wire system and a three-phase five-wire system to be separated.

The above is the installation of induction heating equipment should pay attention to matters, if you want to know more induction heating equipment model, induction heating equipment specifications, induction heating equipment parameters, please contact Baoding Wande Electric