Precautions Before Installation Of Induction Heat Equipment

Precautions before installation of induction heat equipment

pre-job

1. Check the appearance of the device. All components are installed in good condition, without damage, and without missing accessories.

2, check the electrical components and line installation status, insulation without damage, overheating, deformation phenomenon, the connection point wiring

Ensure that the ground cable of the device is properly installed.

3. Select the matching heating coil according to the removal mounting kit. The coil must be connected to the host when the device is powered off

4, the equipment use environment should be kept well ventilated

In operation

1. Wear high temperature insulated gloves when working.

2, choose manual control or automatic control according to the actual operation requirements.

3, select the heating temperature within 0-300℃ and heating selection time within 0-99.9.

4. After the heating is completed, disconnect the power supply of the device, and wear insulation gloves to remove the heating coil and transfer heating parts.

After job

After the operation is completed, turn off the power supply of the equipment, remove the heating device and the connecting line of the main machine, and park the main machine and accessories in the prescribed place.