What Are The Characteristics Of High Frequency Welding Machine？

Profiles and plates are more commonly used in steel structures, and H-beams are more commonly used profiles. I-beams and channel steels that were commonly used in the past were gradually replaced by H-beams due to unreasonable section parameters in some occasions. In this context, high-frequency welding machines have been more and more widely used. So, what are the characteristics of high frequency welding machine? the
1. Economical and reasonable section
The H-beam section welded by high-frequency welding machine has excellent performance. Compared with hot-rolled H-shaped steel, under the same unit weight condition, its section modulus and bending strength are higher than hot-rolled H-shaped steel. In steel structure engineering, the amount of steel used for the same component, hot-rolled H-shaped steel is greater than high-frequency welded H-shaped steel. In steel structure villas, low-rise and low-rise residential buildings, if it is used reasonably, its advantages can be fully utilized to achieve the purpose of saving steel and reducing costs. The high-efficiency high-frequency welding machine has a very reasonable section economy. the

2. Diversification of production varieties
The high-frequency welding machine is to fuse metals of the same composition together, and the requirements for the composition of the base metal are relatively loose. It can not only weld ordinary carbon steel, but also alloy steel, stainless steel, Al, Cu, Ni, Ti and other alloys. Because the H-beam produced by the high-frequency welding machine is less restricted by equipment and has many product specifications. Therefore, high frequency welding machines are very popular. the
3. High speed and low power consumption
The H-shaped steel welded by high-frequency welding machine makes full use of the skin effect and proximity effect of high-frequency current, so that the high-frequency current is highly concentrated in a narrow welding area, and the base metal can be removed from the base material in a short time with less consumption . Heat at room temperature to soldering temperature. High-frequency welding of H-beams does not require welding wire, flux and surface cleaning, so the processing cost is much lower than that of submerged arc welding of H-beams.
The H-beam welded by high-frequency welding machine belongs to contact welding. High-frequency welding H-shaped steel has the advantages of economical and reasonable cross-section, high dimensional accuracy, complete varieties and specifications, fast speed and low consumption. With the continuous improvement of production technology, product quality has been improved. Great progress has been made, and the field of application has gradually expanded. This production line is more suitable for small and medium-sized enterprises to invest in construction.